Golf Driver Shaft Length
Correct Length For A Driver Shaft
Golf Driver Shaft Length For Seniors
Driver Shaft Length Chart
Driver Golf Club Length

How to Measure Driver Shaft Length

The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead.

Generally, the longer your driver shaft is, the more difficult it becomes to have control over the club and hit a ball squarely.

How to measure the length of your driver shaft:

Remember, the average driver standard length is 45 inches for men and 44 inches for women (off the rack). With a shorter shaft can help with the right clubhead, you can make magic off the tee and start to shoot consistently lower scores. But the wrong shaft lengths can make your golf life miserable if you’re hitting it all over the golf course.

Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. The ruler must be kept such that the golf club rests on it.
Measure the distance from the edge of the grip cap to the heel.

The above method can be used in all instances except putters because the shaft is not positioned at the heel in this case.

It’s a good idea to measure the shaft length of all the golf clubs in your bag and save them for future reference.

How to Shorten/Cut Driver Shaft Length

How Long Are Driver Shafts? Over the years, drivers have increased from 43 inches in length to close to 46 inches. The majority of the clubs on the market today will range between 45 and 46 inches. However, on the PGA Tour, since the mid 2000’s the length of the driver shafts have held steady at 44.5”.
How to Measure Golf Shaft Length. When installing new golf shafts it is important to know how long the shafts need to be. Measuring the length of the old shafts will show how long the new ones need to be. If someone else is installing the shafts for you, knowing how long you want them will speed up the shaft replacement process.
For putters, length can be measured a number of ways because of the position of the hosel and/or golf shaft in relationship to the heel.As mentioned before, the length on heel-shafted putters can be measured the same way as an iron or wood. Let’s look at two other options.
Shaft Shaft Weight Weight WOOD 65+ 64 – Driver 44.00' 44.50'. Standard lengths are based on lengths required. GOLFWORKS ® Title: Layout 1.

A short driver shaft may help you hit a straight shot better and also hit the center of the face more than you usually do. Moreover, a short shaft helps you gain better control.

Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft.
Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker.
Fix the golf club in position in a vise.
Position the tube cutter or the saw blade on the position that is marked. Use a tube cutter for a steel shaft and a saw blade in case of a graphite shaft.
Turn the cutting equipment on and cut the shaft through smoothly and slowly.
Turn off the cutting equipment and remove the club.
Smooth out the rough edges on the butt end of the golf club with sandpaper.
Fix a new grip on the shaft end.
Add weights to the clubhead to restore the original swing weight feel.

It’s advisable to wear a pair of safety goggles to protect your eyes during the sawing process. Also, cutting through the shaft in one motion will ensure an even cut.

Effects of Shortening a Golf Shaft

When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.

If you cut the shaft at the tip end, your golf club will become considerably stiffer and lighter. This will, in turn, make the club flatter and affect the swing.

For every 1/2 inch that is cut away from your golf club shaft, you will end up doing away with about three swing weight points. However, the flex will hardly be affected.

On the other hand, cutting at the grip-end does not cause as much stiffening as the tip end. That is why cutting at the grip-end end is preferred for improving accuracy.

How to Lengthen a Driver Shaft

You may consider lengthening a driver shaft if you’re experimenting with golf clubs of different lengths or buying used clubs. The following steps will help you to extend your current driver shaft length.

Get an extension with a butt diameter of a slightly lower size than that of your present shaft so that it goes into the current shaft with a tight fit.
Place a little two-component golf epoxy on a clean surface and mix it up.
Use a toothpick or a small spatula and apply some epoxy on the outer surface of the extension.
Apply a little epoxy inside the shaft in a circular motion.
Insert the extension into the shaft so that it goes well inside the original shaft.
Spray a little acetone on a paper towel and wipe off the overflow at the point of insertion.
Allow the shaft to dry for at least a couple of hours before you use your golf club.

Read more:How to use golf club epoxy

Effects of Lengthening a Golf Shaft

As in the case of shortening a shaft, you must be aware of what the effects would be if you increase its length.

Increasing the length of a 45 inches shaft by an extra inch will help you gain about five to six heavier swing weight points and will affect your timing. The shaft will also be a bit more flexible and softer than it was before the extension.

Remember that your accuracy is likely to be at stake with the lengthened golf club. You may find it difficult to render a solid shot. The extra length also tends to reduce the bend or kick point of the shaft.

What is the Standard Driver Shaft Length

The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches.

Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club. While the standard length for this club was initially 43 inches, it was revised to 44 inches in 2012.

The Maximum Length of the Driver Shaft

The minimum length for a driver shaft is 18 inches. However, the minimum and maximum lengths do not apply to putters. Drivers that exceed 48 inches in length cannot be used to play official tournaments and long driving competitions.

Irrespective of whether you own a golf club with a steel shaft or a graphite shaft, there is a maximum length that your shaft can have. This length has been set as 48 inches by the United States Golf Association under the Rules of Golf and it must not be exceeded.

How to Pick Driver Shaft Length

The driver is undoubtedly the biggest club in a golfer’s bag. Needless to say, this makes it essential for the shaft of the driver to be of the correct length for you to play a perfect game.

Cutting down the shaft length offers assurance of control while increased length generates more clubhead momentum and offers more overall distance.

Steps to Choose the Right Shaft

There are various parameters that you must consider while trying to pick the right shaft for your game. These are as follows:

Length:

The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.

Y

Golf Driver Shaft Length